The flat surface is pasted with a cold press or suitable hot pressing, the curved surface is applied with a vacuum laminator (extruded by the pressure difference between the vacuum and the outside world, and the flat and curved surfaces of the vacuum laminator can be pasted), and the vacuum laminator Flat surfaces can be pasted.

1. PVC film/foil have two different materials, suitable for hand sticking, flat sticking and vacuum forming;

2. The flat material is suitable for labor lamination or mechanical roll coating.

3. Vacuum blister materials are suitable for vacuum blister lamination, and blister materials usually have a temperature resistance above 120 °C.

4. PVC veneer, commonly known as plastic veneer, is a widely used surface decoration material. According to the pattern or color, it can be divided into single color or wood grain, according to the hardness, it can be divided into PVC film and PVC sheet, according to the brightness, it can be divided into matt and high gloss.Among them, PVC sheets are generally used in the vacuum blister production process, and the surfaces of office furniture, cabinet doors, bathroom cabinet doors, home improvement doors, and decorative panels are often made of PVC sheets for vacuum blister veneer. PVC wood grain film and plain film are suitable for hand sticking, flat sticking and vacuum suction.